71
Function
■ General Settings
Screen
No.
15 Fold Position (A3/LDR) ●-4.0 - +4.0 mm 0.0 mm
16 Fold Position (B4) ●-4.0 - +4.0 mm 0.0 mm
17 Fold Position (A4/LTR-R) ●-4.0 - +4.0 mm 0.0 mm
19 Language Sel. Priority Selects the display message language. Off
●Off, On
20 Date Time Setting Sets date time registered.
●Month, Day, Year, Time
21 Weekly Timer Sets the weekly On/Off timer.
22 DHCP Default Sets the DHCP.
∗
Yes
●No, Yes
23 TCP/IP Address Sets user IP address.
∗
●3 digits x 4
24 TCP/IP Subnet Mask Sets the subnet mask.
∗
●3 digits x 4
25 TCP/IP Default Gateway Sets the gateway address.
∗
●3 digits x 4
26 DNS Server Address Sets the DNS server.
∗
No
●No, Yes
27 Hard Disk Initialize Selects the HDD format/deletion. Format (Stop)
●Format, Deletion
∗∗∗
<Sub Function>
For Format : No, Yes
For Deletion: Stop, Medium, High
<Sub Function>
For Medium/High: No, Yes
When elimination is executed, it differs
depending upon the data accumulation
quantity inside the hard disk, but until
operation of elimination completes, with
Medium maximum of 2 hours, maximum of 3
hours are required with High. Because at that
time, as for the knitting machine it cannot use,
when executing knitting machine talent,
please consider use frequency.
28 Hard Disk Error Check Selects the hard disk error check.
∗∗
●Stop, Start
Modes Function
Initial
Setting
04/10
06/10
NOTE
● The Key Operator ID Code is required before any changes can be made to items on this
page.
∗
When Functions No. 22 to 26 are set, cycle the power by turning the Power Switch on the
Left side of the machine OFF and ON.
∗∗
Not required in copying mode, but needed when installing options with advanced functions
(See page 81).
∗∗∗
When functions No. 24 to 27 and No. 33 to 36 and 42 are set, cycle the power by turning the
Power Switch on the Left Side of the machine OFF and ON.
05/10
