Facsimile
(Option) /
Internet Fax
53
Enter the Key Name for the Address
Book, and then select “OK”.
7
Enter the Key Name.
(Up to 15 characters)
Select “OK”.
Enter the name of the destination, and
then select “OK”.
6
Enter the Destination Name.
(Up to 15 characters)
Select “OK”.
Enter the fax number, and then select
“OK”.
5
Enter a fax number.
(Up to 36 digits including
pauses and spaces)
Select “OK”.
Select whether you wish to add the
telephone number to Favorites.
8
To enter other Fax numbers:
Repeat steps 5 to 8.
To exit this setting mode:
Press the Reset key.
9
●If you need a special access number to get
an outside line, dial it first, and then select
“Pause” to enter a pause (represented by a
“-”) before dialing the full number.
Ex: 9 Pause 5551234 -> 9-5551234
●If you are using Pulse dialing and you wish to
change to Tone dialing in the middle of dialing,
select “
” (represented by a “/”).
The Dialing mode will change from Pulse to
Tone after dialing the digit “/”.
Ex: 9 Pause
5551234 -> 9-/5551234
●A “/” symbol appears when “Tone” is changed
to “Pulse” in “06 Dialing Method”.
●To correct a mistake, press
or to move
the cursor to the right side of the incorrect
character. Press “Back Space” to delete, and
enter the correct character. (See page 48)
●Key Names are used to select destinations on
the Touch Panel Display.
