8
RQT8912
Preparations
1 Attaching the battery (When the unit is off)
The illustrations shown are of CGR-H711; however the steps for CGR-H712 (included with
[DVD-LS82]) or CGR-H701 (optional) are the same.
Detaching
≥
Turn the unit off before detaching the battery pack.
When not using for long periods of time
≥
Remove the battery pack (➜ left).
(Even when the unit is turned off, there is a
small amount of voltage running through the
unit, and this may result in a malfunction.)
≥
Recharge the battery for re-use.
Clicks into place
Check to make sure it is securely fastened.
Bottom side of this unit
RELEASE
DETACH ATTACH
Battery pack
1 Press and hold
2
DC IN
DC IN 12 V
To
household
AC outlet
AC adaptor
(included)
AC power supply cord
(included)
≥
You can also use this unit without charging while
connecting the AC adaptor and the AC power supply
cord.
≥
You can also use this unit without charging while
connecting Car DC Adaptor (
➜
page 20, Enjoying in a car).
To conserve power
This unit consumes 0.4 W of power even when turned
off. When the unit is not going to be used for a long time,
disconnect the AC power supply cord from the
household AC outlet.
2 Recharging the battery
The battery is not charged at the time of purchase. Charge before initial use.
[
Í
] goes out ➜ lights
§
[CHG] lights ➜ goes out
§
Only when recharged with the unit
off.
Recharging time
:
➜ page 9, Approximate recharging
and play times
When finished, disconnect the AC
adaptor and the AC power supply cord.
Í
CHG
Started
Finished
Preparations
P2-35 e.fm Page 8 Friday, December 29, 2006 5:46 PM
