6. Copy
38
6 CopyCopying
6.1 Making a copy
1 Adjust the width of the document guides (1) to fit
the actual size of the document.
2 Insert the document (up to 15 pages) FACE DOWN
until the unit grasps the document and a single beep
is heard.
L If the document guides are not adjusted to fit the
document, re-adjust them.
3 If necessary, press {A} or {B} repeatedly to select
the desired resolution.
4 Press {COPY}.
5 If necessary, enter the number of copies (up to 99).
6 Press {START}, or the unit will start copying within
20 seconds.
L The unit will start copying.
Note:
L Any document which can be sent as a fax can also
be copied (page 28).
To stop copying
Press {STOP}.
To select the resolution
Select the desired resolution according to the type of
document.
– “FINE”: For printed or typewritten documents with
small print.
– “SUPER FINE”: For documents with very small print.
– “PHOTO”: For documents containing photographs,
shaded drawings, etc.
– “MIXED” (Photo with text): For documents
containing photographs and text.
L If you select “STANDARD”, copying will be done
using “FINE” mode.
6.1.1 More copying features
To enlarge a document
1. Insert the document, then press {COPY}.
2. Press {>}.
3. Press {A} repeatedly to select from “105%” to
“200%” by changing the enlargement rate 5% at a
time.
4. Press {START}.
L The unit will only enlarge the centre of the upper
part of the document. To make an enlarged copy
of the bottom of the document, turn the document
around, and then make a copy.
Example: 150% enlarged copy
To reduce a document
1. Insert the document, then press {COPY}.
2. Press {>}.
3. Press {B} repeatedly to select from “50%” to “95%”
by changing the reduction rate 5% at a time.
4. Press {START}.
Example: 70% reduced copy
{>}{A}{B}
{COPY}
{STOP}
1
{START}
Original document Enlarged copy
Original document Reduced copy
AB
CD
AB
CD
AB
CD
AB
CD
FL313HK-PFQX2630ZA-en.book Page 38 Tuesday, August 29, 2006 10:19 AM
