Setup
- 18 -
Date and time, your logo and fax number
You should program the date and time, your logo and facsimile telephone number. This
information will be printed on each page transmitted from your unit.
Example:
Setting the date and time
1
Press
{
MENU
}
.
SYSTEM SET UP
PRESS NAVI.[
(
)
]
2
Press
{<}
or
{>}
until the following is
displayed.
SET DATE & TIME
PRESS SET
3
Press
{
SET
}
.
L
Cursor (
|
) will appear on the display.
Example: M:
||
01/D:01/Y:02
TIME: 12:00AM
4
Enter the correct day/month/year by
selecting 2 digits for each, using the dial
keypad.
Example: August 10, 2002
Press
{
0
}{
8
}
{
1
}{
0
}
{
0
}{
2
}
.
M:08/D:10/Y:02
TIME:
||
12:00AM
5
Enter the correct hour/minute by selecting 2
digits for each, using the dial keypad.
Press
{*}
to select “AM” or “PM”.
Example: 10:15PM
1. Press
{
1
}{
0
}
{
1
}{
5
}
.
M:
||
08/D:10/Y:02
TIME: 10:15AM
2. Press
{*}
until “PM” is displayed.
M:08/D:10/Y:02
TIME: 10:15PM
6
Press
{
SET
}
.
The next feature will be displayed.
7
Press
{
MENU
}
.
Note:
L
You can enter the number by pressing
{+}
or
{-}
in steps 4 and 5. In this case, press
{>}
to move the cursor.
L
The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press
{<}
or
{>}
to move the cursor to the
incorrect number, and make the correction.
Fax Correspondence
Your logo
Your fax number
Date and time
FROM : Panasonic Fax
FAX NO. : 1234567 Feb. 26 2002 09:02AM P 1
Display
{SET}
{>}{<} {-}
{+}
{MENU}
