8. Programmable Features
43
Code #06 (KX-FP343 only): Changing the ring
setting in FAX ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “1”, “2” (default), “3”, “4”, or “5
EXT.TAM”. If you are using the unit with an
answering machine, set to “5 EXT.TAM” (page
30).
Code #06 (KX-FP363 only): Changing the ring
setting in TAD/FAX mode
TAD RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in TAD/FAX mode. You can select
“1”, “2” (default), “3”, “4”, “TOLL SAVER” or
“RINGER OFF”. See page 29 for details.
L Set feature #77 to “TAD/FAX” (page 46)
beforehand.
Code #06 (KX-FP363 only): Changing the ring
setting in FAX ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “1”, “2” (default), “3” or “4”.
L Set feature #77 to “FAX ONLY” (page 46)
beforehand.
Code #10 (KX-FP363 only): Changing the
maximum incoming message recording time
RECORDING TIME
=VOX [±]
“VOX” (default): Unlimited.
“1 MIN”: Up to 1 minute.
Code #11 (KX-FP363 only): Setting the
remote operation ID
REMOTE TAD ID
ID=111
1. Press {MENU}.
2. Press {#} then {1}{1}.
3. Enter any 3-digit number except a number
using 0 or 7.
L The default ID is “111”.
4. Press {SET}.
5. Press {MENU}.
Code #12 (KX-FP343 only): Securing the
remote operation for the answering machine
REMOTE TAM ACT.
=OFF [±]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID to secure the remote
operation for the answering machine.
1. Press {MENU}.
2. Press {#} then {1}{2}.
3. Press {A} or {B} to select “ON”.
4. Press {SET}.
5. Enter your ID from 1 to 5 digits, using 0–9, *
and #.
L The default ID is “11”.
6. Press {SET}.
7. Press {MENU}.
Code #13: Setting the dialling mode
DIALLING MODE
=TONE [±]
If you cannot dial, change this setting depending
on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A [±]
You can select “A” (default), “B” or “C”.
8.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON [±]
“ON” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 24).
“OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=OFF [±]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
FP343-363HK.book Page 43 Thursday, July 31, 2003 2:45 PM
