25
L-mode service
Storing e-mail addresses in the
addressbook
1Press (Menu) and , then press
(Register).
5Enter the e-mail address, up to 50 characters (see the
table on page 9 for instructions), then press
(Register).
●
To program another party, press (Next party)
and repeat steps 2 to 5.
6Press (Stop) to exit the program.
3Enter the name, up to 20 characters (see the table on
page 9 for instructions), then press (Register).
4Press (Search button) to select the e-mail
address column, then press (Set).
2Press (Set).
Editing/deleting a stored e-mail
address
1Press (Menu) and .
2Press (Search button) repeatedly until the
desired name is displayed.
3 ■ To edit the party
Press (Edit).
■ To delete the party
Press (Delete) and (Yes), then go to
step 9.
4Press (Set) and edit the name (see the table on
page 9 for instructions), then press (Register).
●
If you do not need to edit the name, skip to step 5.
5Press (Search button) to select the kana
column.
●
If you do not need to edit the kana, skip to step 7.
6Press (Set) and enter the correct kana, then
press (Register).
7Press (Search button) to select the e-mail
address column.
●
If you do not need to edit the e-mail address, skip to
step 9.
8Press (Set) and enter the correct e-mail
address, then press (Register).
9Press (Stop) to exit the program.
Name
Kana
E-mail address
You can program up to 50 addresses.
