A SERVICE OF

logo

55
Installations and connections
Installing the thermal recording paper
Rolling core is upside
Reverse
Slack
2 Install the recording paper.
Approx.
10 cm
3
Pull approximately 10 cm of recording paper
out of the unit, and close the control panel by
pressing “ down on both sides until it
clicks into place.
1 Open the control panel.
4 Pull the recording paper towards you and
tear it off.
When the unit runs out thermal recording paper, the following message will be displayed.
キロクシガアリマセン
U20
カミヲイレテクダサイ
スイショウヒンバン:
UG
-
0010A4
Install a new thermal recording paper.
Replacement thermal recording paper:
UG-0010A4 (15 m role type) 473
As of September 2008. Tax included.
Approximately 5 cm of recoding paper will
be fed out automatically.
KX-PW211DL_QG.indb 5 2008/09/11 13:05:22