Operating Instructions
14
1.3 Camera Feature Locations
1.3.1 Front View
Indicator
Indicator can be controlled on Indicator Control window on Page 84. Color
indications are shown below.
*
1
Orange indicator will continue blinking in the DHCP setting.
*
2
Refer to page 118 for the red blinking.
Fixed Focus Lens and Pan/Tilt operation
Fixed Focus Lens can move in the Pan/Tilt operation. Operation Bar on the Single
Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens 120°
horizontally and 45° vertically. Refer to page 42 for the operation bar.
Note
Do not touch the Lens Cover. Touching it may leave a fingerprint and can
cause the image to be out of focus.
Indicator
(Refer to page 84 for the setup.)
Fixed Focus Lens
1 m (40 inches)—Infinity
Pan: -60° to +60°
Tilt: 0° to -45°
The field of view in Pan/Tilt ranges
horizontally about 165° and
vertically about 78°.
Lens Cover
Power
on
Normal Operation
Updating Firmware
Getting IP address
Finish getting IP address
Not on the LAN
Orange OrangeOrange blinking*
1
Orange blinking
Pushing CLEAR SETTING button Orange blinking twice
Internal Failure of Network Camera Red blinking*
2
On the LAN
Using
DHCP
Orange Green
Green
Green
Green blinking
Green blinking
