67
Flicker occurs. (The screen
flickers.)
Images from analog output
are not smoothly displayed.
Images cannot be saved on
the SD memory card.
49
• Is the camera used under fluorescent lamps operating
at 60 Hz?
By setting the shutter speed to "1/60" or "1/120", flicker
caused by fluorescent lamps can be diminished.
• Check if the SD memory card is inserted firmly?
Replace the SD memory card with a new one.
(Generally, SD memory cards have a limited number
of times to rewrite.) Contact your dealer if this problem
is not solved even after replacing the SD memory card.
–
23
• Isn’t the resolution set to "Full scan"?
When the selected resolution is "Full scan", the frame
rate of the analog output will be 1/4.
Reference
pages
Cause/solution
Symptom
