VCD CD
∫ To move to the page before or after
the one shown
Press [6, 5].
∫ To clear the programmed tracks one
by one
Press [3, 4] to select the track and press
[CANCEL]. (Alternatively you can select
“Clear” and press [ENTER].)
∫ To clear the whole program
Move to “Clear all” with [3, 4, 2, 1] and
press [ENTER]. The whole program is
also cleared when the unit is turned off, or
the disc lid is opened.
∫ To exit the program mode
Press [PLAY MODE] until the program
play screen disappears.
≥The program is retained in memory.
Random play
The unit plays the tracks on a disc in ran-
dom order.
While stopped
1 Press [PLAY MODE] until
the random play screen
appears.
2 Press the numbered but-
tons to select the track.
≥To select a 2-digit number
≥Example: To select track 23, press
[S10], then [2] and [3].
≥To select a track using the cur-
sor jockey buttons
≥Press [ENTER] and [3, 4] to se-
lect a track, then press [ENTER]
again to register the track number.
≥Repeat step 2 to select another
track.
≥“Total Time” tells you the total time
of the programmed tracks.
3 Press [1] (play).
Play now begins in the programmed
sequence.
∫ To add or change tracks
Press [3, 4] to select an available item,
then repeat step 2.
2 Press [1] (play).
Play now begins in random order.
∫ To exit the random mode
Press [PLAY MODE] while stopped until
the random play screen disappears.
