6
RQT8127
STEP 1 Connection to a television
≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the terminals of the same colour.
≥Unless otherwise indicated, illustrations are of the models for the Middle East and South Africa.
≥(\Continental\Europe\ :There is no S VIDEO OUT terminal on the unit.)
Please connect directly to TV.
R
L
P
R
P
B
R
L
Y
Please connect directly to TV.
AV
SCART (AV) IN
AUDIO IN
R L
COMPONENT
VIDEO IN
AUDIO IN
R L
VIDEO
IN
S VIDEO
IN
Audio/video
cable (included)
With VIDEO IN or S VIDEO IN
S video cable
§
With SCART (AV) IN
21-pin SCART
cable
≥If the television is compatible with S-video,
select “S-Video/YPbPr”, or compatible with
RGB, select “RGB/No Output” for the AV
terminals in QUICK SETUP (➜ page 7).
With COMPONENT VIDEO IN
Video
cables
§
When using this connection, the audio cable
(red and white plugs) should also be connected.
You can connect the audio cable to the 2-
channel audio input terminals of an analog
amplifier or system component to enjoy
stereo sound.
Audio/video
cable (included)
Not used
Television
\Continental\Europe\
To enjoy progressive video
Connect to a progressive output compatible television.
1
\Continental\Europe]
Select “Video/YPbPr” for the component terminals in
QUICK SETUP (➜ page 7).
2 Set “Video Output Mode” to “xxxp”, then follow the
instructions on the menu screen (➜ page 17, Picture
Menu).
\Continental\Europe]
Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/
60i . 60p input terminals are progressive compatible.
Back of the unit
or
Connection to a television
