8. Programmable Features
61
8.3 Fax features
Feature/Code Selection
Printing a confirmation
report
{#}{4}{0}{1}
To print a confirmation report for fax transmission results (page 29).
{0} “OFF”: Confirmation reports will not be printed.
{1} “ON”: A confirmation report will be printed after every
transmission.
{2} “ERROR” (default): A confirmation report will be printed only when
fax transmission fails.
Setting the journal report
to print automatically
{#}{4}{0}{2}
{0} “OFF”: The unit will not print a journal report, but will keep a record
of the last 30 fax transmissions and receptions.
{1} “ON” (default): The unit will print a journal report automatically
after every 30 new fax transmissions and receptions (page 29).
Sending documents
overseas
{#}{4}{1}{1}
If you cannot send a fax overseas even if the number is correct and the
line is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission
speed.
{0} “OFF”: Deactivates this feature.
{1} “NEXT FAX”: This setting is effective only for the next attempted
fax transmission. After transmission, the unit will return to the previous
setting.
{2} “ERROR” (default): When the previous fax transmission fails and
you wish to re-send the document.
Note:
L This feature is not available for broadcast transmission.
L Calling charges may be higher than usual.
FLB811-PFQX2307ZB-en.book Page 61 Thursday, February 16, 2006 3:57 PM
