4
RQT6208
Speaker connections
Step
1
2 3 4
Placement of speakers
Connecting speakers
Front speakers (A left B right)
Place on the left and right of the TV at seated ear height so that
there is good coherency between the picture and sound.
Center speaker (C)
Place underneath or above the center of the TV. Aim the speaker at
the seating area.
Surround speakers (D left E right)
Place on the side of or slightly behind the seating area, about one
meter (3 feet) higher than ear level.
Surround back speaker (F)
Place behind the seating area, about one meter (3 feet) higher than
ear level.
Subwoofer (G)
The subwoofer can be placed in any position as long as it is at a
reasonable distance from the TV.
Note that some experimentation can yield the smoothest low
frequency performance. Placement near a corner can increase the
apparent output level, but can result in unnatural bass.
Other connections are possible depending on your speaker system.
See your speaker system’s operating instructions for details.
The front, center, and surround speakers should be placed at
approximately the same distance from the seating area. The
angles in the diagram are approximate.
G
Subwoofer
Front speakers – Impedance: A or B 4–8 Ω, A and B 8 Ω
A
B
Right
Left
Speaker cable
Speaker cable
Turn off the receiver before connecting the speakers.
F
“B” terminals
For connection to a second pair of speakers.
Use the A terminals to enjoy SURROUND, SFC and DVD 6CH
INPUT.
Note
If you connect speakers with an
impedance under 6 Ω, switch on
“LOW IMP” (
\
page 12).
Note
