5
SLEEP
CLOCK/
TIMER ADJ
DISPLAY
TIMER
SET/CHECK
PGM/CLEAR
-
AUTO PRESET
OPEN/
CLOSE
123
4
5
6
7
8
0
9
>
=
10
MUSIC PORT
TUNER/
BAND
CD
SOUND
EQ
LIVE
VIRTUALIZER
PLAY
MODE
ALBUM
VOL
VOL
CLOCK/
TIMER ADJ
ui
3
4
CLOCK/
TIMER ADJ
EQ
PLAY
ON
CLOCK/
TIMER ADJ
ui
3
4
CLOCK/
TIMER ADJ
PLAY
OFF
MUSIC PORT
TUNER/
BAND
CD
q/h
4 VOL
VOL
3
PLAY
Setting
the time
This is a 12-hour
clock.
SLEEP
timer
The SLEEP
timer can turn
the unit off after
a set time.
Sound
quality
You can choose
one of four types
of sound quality.
Live
Virtualizer
You can create a
three-dimensional
sound fi eld when
listening to stereo
sound.
Select the time
• Press and hold to
change the time faster.
• To display the clock
when the unit is on
• To check the time when
the unit is off
The clock is accurate to within ±60 seconds a month.
Readjust if necessary.
Set again after disconnecting the AC power supply
cord or power failure.
Note
•
To check the remaining time
The play timer and sleep timer can be used together.
The sleep timer always has priority. Be sure not to
overlap timer settings.
Note
• Each time you press the button:
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120
OFF (Canceled)
Press once
Set the clock
Select the sound quality
• Each time you press the button:
Press to turn the Live
Virtualizer ON/OFF
The actual effect depends on the source played.
Note
Play timer
This timer starts
play of the
selected source
at the selected
time.
Preparation: Set the clock (
left).
1 Perform timer settings
Set the start time
While the time is displayed
Select
“zPLAY ON”
Select the start time
• Press and hold to
change the time
faster.
Set the end time
Select
“zPLAY OFF”
Select the end time
• Press and hold to
change the time
faster.
2
Select the source and adjust the volume
Select the source Adjust the volume
Display “zPLAY” Turn the unit off
3 Turn the timer on
The unit must be off for the timer to be operated.
You can enjoy any sources while the play timer is set.
The timer function will be canceled when you change
the frequency step. Follow the step 3 again while the
unit is on.
Note
•
To cancel the timer
while the unit is on
Clear “zPLAY”
• To change the timer
• To check the setting
while the unit is off
The timer function will be canceled, but the settings
stay in the memory.
The timer comes on every day if the timer is on.
Note
Clear “
z
PLAY”and
set the timer again
• If you turn the unit off and on again while the timer
is functioning, the fi nish time setting will not be
activated.
• When the “MUSIC P” source is selected, set the
timer on the connected equipment to the same time.
Note
Display
You can change
the display.
The following types of information are displayed.
• Original display
• Time display
RQT8520
Press[
^
] to turn the unit
on.
EQ OFF (Canceled)
CLEAR
(
Clarifies higher
sounds)
XBS
(Adds punch
to rock)
SOFT
(
For background
music)
VOCAL
(
Adds gloss to
vocals
)
