Menu navigation
ENGLISH - 45
Settings
To reset to the factory default
If the <DEFAULT> button on the remote control
is pressed, the values set or adjusted in the sub-
menu items will be restored to the factory default
settings.
button
Press the <DEFAULT> button on the
remote control.
This function differs depending on the screen
displayed.
z
When the sub-menu screen is displayed:
The sub-menu items displayed are returned to their
default settings.
z
When the individual adjustment screen is displayed:
Restores only the settings of the current item to the
factory default settings.
0
KEYSTONE
Note
z
To restore all the settings to the factory default,
refer to the [PROJECTOR SETUP] menu
→
[INITIALIZE ALL] (
page 74).
z
Some menu items cannot be reset by pressing the
<DEFAULT> button. Adjust each item manually.
z
The mark above the bar scale in the individual
adjustment screen indicates the factory default
setting. The position of the mark varies by the
selected input signals.
10
Current setting
