4
RQT9743
Control reference guide
1 Standby/on switch (Í/I) (Í)
Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small
amount of power.
2 Select the audio source
3 Basic playback control buttons
4 Enter setup menu
5 Enter the iPod/iPhone menu
Change displayed information
6 Open or close the sliding door
7 Adjust the volume (0 (min) to 50 (max))
8 Mute the sound
Mutes the sound. Press again to cancel. “MUTE”
is also cancelled when the volume is adjusted or
the unit is turned off.
9 Enter playback menu
10 Enter sound menu
11 Selection/OK
12 “IPOD_PORT” for iPod/iPhone/iPad (l 6)
USB port (l 6)
13 Dynamic Bass sound effect selector
14 Power on indicator
15 Display
16 Sliding door
17 Remote control signal sensor
Distance: Within approx. 7 m directly in front.
≥ To avoid interference, please do not put any objects in
front of signal sensor.
Unless otherwise indicated, operations are described
using the remote control.
On the remote control:
[iPod/USB]: “IPOD_DOCK” ,. “IPOD_PORT” / “USB”
[CD/RADIO]:
“CD” ----. “DAB/DAB+ ([SC-HC38DB])” ----. “FM”
:;
“AM ([SC-HC38] ([Australia[and[New[Zealand[ only))”
[ ]: “BLUETOOTH”
On this unit:
“CD” -----. “DAB/DAB+ ([SC-HC38DB])” -----. “FM”
;
“AM ([SC-HC38] ([Australia[and[New[Zealand[ only))”
;
“IPOD_PORT” / “USB”
“BLUETOOTH”
^--------------------
“
IPOD_DOCK
”
(-------------------b
D.BASSSELECTOR
iPad
∫ Before using for the first time
Remove the insulation sheet A.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥ Set the button-type battery with its (i) mark facing upward.
≥ Keep the button-type battery out of reach of children to prevent swallowing.
SC-HC38_DBEB_DBGN_GS~RQT9743-B.book 4 ページ ２０１３年１月２１日 月曜日 午後１時６分
