19
RQT9882
ENGLISH
4 Measure and mark the position of both sides of
the wall mount brackets.
≥ Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
5 Attach the wall mount bracket to both sides of
the wall with two screws (not supplied).
≥ Use a level to ensure both wall mount brackets are
level.
6 Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the FM antenna and the AC power supply
cord to the unit before hanging the unit onto the
wall. (l p. 6)
≥ After hanging the unit, release your hands carefully
to confirm the unit sits securely on the wall mount
brackets.
7 Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥ Refer to step 5 for requirements before screwing.
8 Attach the fall prevention cord (not supplied) to
the wall.
≥ Make sure that the slack of the cord is minimal.
300 mm
(11
13
/16q)
500mm
(19
11
/16q)
75 mm
(2
15
/16q)
142 mm
(5
19
/32q)
154mm
(6
1
/16q)
100 mm
(3
15
/16q)
142
mm
(5
19
/32q)
100mm
(3
15
/16q)
At least 30 mm (1
3
/16q)
‰7.5 mm (
19
/64q)
to
‰9.4 mm (
3
/8q)
‰4 mm (
5
/32q)
Wall mount bracket
Safety holder fixing screw
(not supplied)
Safety holder
Fix to the wall
Cord (not supplied)
Screw eye (not supplied)
Wall
SC-HC39_PPC~RQT9882_mst.book 19 ページ ２０１４年１月３１日 金曜日 午後７時４５分
