VQT5K74
4
Placement of speakers
1 Subwoofer SB-MAW370 (L)
2 Subwoofer SB-MAW370 (R)
3 Subwoofer SB-MAY370 (L)
4 Subwoofer SB-MAY370 (R)
5 Front speaker SB-MAF370 (L)
6 Front speaker SB-MAF370 (R)
7 Stacking bracket
Setup 1
Setup 2
Subwoofers
Put on the floor or a sturdy shelf to reduce vibration.
Use only the supplied speakers.
You can cause damage to the system and decrease the
sound quality if you use other speakers.
Note:
• Keep your speakers more than 10 mm from the main unit
for ventilation.
• Put the speakers on a flat safe surface.
• These speakers do not have magnetic shielding. Do not
put them near TVs, PCs or other equipment easily
influenced by magnetism.
• When you play at high levels for a long period, it can cause
damage to the speakers and decrease the life of the
speakers.
• Decrease the volume in these conditions to prevent
damage:
- When the sound is distorted.
- When you adjust the sound quality.
Maintenance
To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean
this system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
1 Put the stacking bracket on top of the subwoofer
SB-MAW370/SB-MAY370.
Press down the stacking bracket until it is secured in
position.
e.g
2 Stack the speakers according to Setup 1 or
Setup 2. (> “Placement of speakers”).
Example: Stacking of front speaker in Setup 1
arrangement.
CAUTION!
Do not touch the subwoofer cones reverberating
surfaces:
• This may damage the subwoofer cone.
• The subwoofer cone may be hot.
Stacking the speakers
Stacking bracket
SB-MAW370
SB-MAF370
Stacking bracket
SB-MAW370
SC-MAX370PU_eng.book 4 ページ ２０１４年３月６日 木曜日 午後２時５６分
