VQT5C51
16
This unit is not operating correctly.
For example, this unit turns off all of
a sudden or all indicator blink.
• Using a paper clip or similar material,
press the [RESET]. (> 6, 7)
The One-Touch Connection (NFC
feature) is not working.
• Turn on the NFC feature of the device.
Volume is low when this unit is
connected to a TV via Bluetooth
®
.
• Adjust the volume on the TV. The
volume of headphone output may be
coupled with the volume of the
Bluetooth
®
output depending on the
TV. In such case, adjust the volume
of the headphone output on the TV.
∫ Amplifier section
∫ Speaker section
Specifications
RMS Output Power (AC Adaptor)
Normal Mode
[NA30]
10 % total harmonic distortion
Front ch (each ch driven):
5 W per channel (1 kHz, 6 ≠)
Subwoofer:
10 W per channel (100 Hz,3 ≠)
Total RMS output power: 20 W
[NA10]
10 % total harmonic distortion
Front ch (both ch driven):
5 W per channel (1 kHz, 6 ≠)
Total RMS output power: 10 W
RMS Output Power (Battery)
Normal Mode
[NA30]
10 % total harmonic distortion
Front ch (each ch driven):
4 W per channel (1 kHz, 6 ≠)
Subwoofer:
8 W per channel (100 Hz, 3 ≠)
Total RMS output power: 16 W
[NA10]
10 % total harmonic distortion
Front ch (both ch driven):
4 W per channel (1 kHz, 6 ≠)
Total RMS output power: 8 W
RMS Output Power (AC Adaptor/Battery)
Long Play Mode
[NA30]
10 % total harmonic distortion
Front ch (each ch driven):
2 W perchannel (1 kHz,6 ≠)
Subwoofer:
4 W perchannel (100 Hz, 3 ≠)
Total RMS output power: 8 W
[NA10]
10 % total harmonic distortion
Front ch (both ch driven):
0.5 W perchannel (1kHz, 6 ≠)
Total RMS output power: 1 W
Front Speaker (L/R)
[NA30]
Type:1 way 1 speaker system (Closed type)
Unit(s): 5 cm k2
Impedance: 6 ≠
[NA10]
Type:1 way 1 speaker system
(passive radiator type)
Unit(s): 4 cm k2
Impedance: 6 ≠
[NA30]
SUBWOOFER
Type:
1 way 1 speaker system (passive radiator type)
Unit: 8 cm k1
Impedance: 3 ≠
Passive Radiator
[NA30] Unit: 8 cm k 2
[NA10] Unit: 8 cm k 1
SC-NA30_10EB_VQT5C39_eng.book 16 ページ ２０１３年８月７日 水曜日 午前１１時４６分
