10
RQT7903
Recording the radioRecording the radio
1
Insert the cassette to be recorded on.
2
Tune to the required station (refer page 11).
3
Press [¶/8 REC] to start recording.
Other basic operationsOther basic operations
To Action
erase a recorded
sound
1) Insert the cassette to be recorded on.
2) Press [TAPE 3] and then [STOP 7].
3) Press [¶/8 REC].
stop recording Press [STOP 7].
stop recording
temporarily
1) Press [¶/8 REC].
2) Press again to resume recording.
record on the other
side of the tape
Turn the cassette over and press
[¶/8 REC].
Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may infringe
copyright laws.
Erasure preventionErasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side A
Tab for side B
To re-record
Normal tape
Adhesive tape
Before recordingBefore recording
Preparation
Wind up the leader tape so that recording can begin immediately.
• Use normal position tapes.
• High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Recording CDsRecording CDs
1
Insert the cassette to be recorded on.
•
OPE
N
Insert inside the
guides
Forward side
2
Press [0 OPEN/CLOSE] to insert the CD.
Press again to close.
3
Press [CD 3/8] and then [STOP 7, -DEMO].
4
Press [¶/8 REC] to start recording.
Recording specifi c CDs or tracksRecording specifi c CDs or tracks
1
Press [CD 3/8] and then [STOP 7, -DEMO].
2
Press [PLAY MODE] to select your desired mode
(refer page 7).
3
Press [¶/8 REC] to start recording.
Recording programmed tracksRecording programmed tracks
1
Program the tracks you want (refer page 8).
2
Press [¶/8 REC] to start recording.
Manual tuning
1
2
3
T
P
fr
s
•
•
•
To improve FM sound qualityT
P
T
P
•
•
RDS broadcasting (For Europe)R
E
a
P
•
Cassette tape – Record
Untitled-1 10Untitled-1 10 3/18/05 10:20:17 AM3/18/05 10:20:17 AM
