15
VQT5F18
Basic operationsAdvanced operations
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1 Press [SETUP].
2 Select an item and change the settings.
To exit the screen
Press [SETUP].
∫ TV System
Perform the setup so it matches the TV System of
the connected TV.
∫ Display Dim
Changes the brightness of the unit’s display.
∫ Screen Saver
This is to prevent image retention on the screen.
≥ When this is set to “On”:
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to Screen saver
automatically.
≥ While playing and pausing, etc., this function is
not available.
∫ Sleep Timer
Set the sleep timer.
∫ HDMI CEC
Set to use “HDMI CEC” function when connected
to a device that supports “HDMI CEC”.
∫ Power Off Link
Select the desired power off link setting of this unit
for HDMI CEC operation.
Video/Audio
When the TV is turned off, this unit will turn off
automatically.
Video
When playing back audio only content, the unit
will not turn off automatically.
∫ Auto Standby
Switch the home theater to standby mode after
20 minutes of no activity when in disc or USB
mode.
∫ OSD
Choose the language for menus and on-screen
messages.
∫ Audio
Choose the language for audio.
∫ Subtitle
Choose the language for the subtitle.
∫ Menu
Choose the language for the disc menus.
∫ HDMI Audio Out
This setting selects whether or not to output audio
from HDMI.
∫ Digital Audio Out
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment
cannot decode the respective audio format.
This unit decodes the audio format and
transmits to the connected equipment.
≥ If you do not make proper settings the audio
may be static or noisy.
SYSTEM
Power Off Link
HDMI CEC
Sleep Timer
Screen Saver
Display Dim
TV System
Auto Standby
Video/Audio
On
Off
On
100%
Auto
On
SYSTEM
LANGUAGE
AUDIO
VIDEO
OTHER
OK
LANGUAGE
AUDIO
SC-XH385&333GSGA-VQT5F18_mst.book 15 ページ ２０１４年３月１０日 月曜日 午後２時０分
