17
VQT5F18
Advanced operations
∫ Resolution
Select suitable picture quality with your TV.
(Video recordings will be converted to, and output
as, high-definition video.)
≥ This works only when the HDMI connection is
being used.
∫ TV Type
Set to match the type of TV connected.
∫ Picture Settings
Adjust the picture settings, such as the brightness
and contrast.
≥ If you select “Personal“, you can adjust the
brightness, contrast and other items separately.
∫ Bluetooth Standby
The unit turns on automatically from standby
mode when you connect a registered Bluetooth
®
device.
∫ Rating
Set a rating level to limit DVD-Video play.
∫ Password
Change the password for “Rating”.
You can enter the 4-digit password with the
number buttons.
≥ The default password is “0000”.
∫ Default
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of ratings, on-screen language, etc.
Speaker installation
option
Consult a qualified building contractor when
attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers and personal injury.
You can attach all of the speakers (except
subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to
be attached should be capable of supporting
10 kg per screw.
1 Drive a screw (not supplied) into the wall.
A At least 30 mm
B ‰ 4.0 mm
C ‰ 7.0 mm to
‰ 9.4 mm
D Wall or pillar
E 5.5 mm to 7.5 mm
2 Fit the speaker securely onto the screw(s)
with the hole(s).
Use the measurements indicated below.
≥ Leave at least 20 mm of space above the
speaker and 10 mm on each side to allow
enough space for fitting the speaker.
[XH385] CENTER
A 14 mm
B 65 mm
C 175 mm
VIDEO
OTHER
Attaching to a wall
e.g., [XH385] Surround speaker
DO NOT DO
≥ In this position, the
speaker will likely fall if
moved to the left or right.
≥ Move the speaker so
that the screw is in this
position.
Screwing positions on the
wall
SC-XH385&333GSGA-VQT5F18_mst.book 17 ページ ２０１４年３月１０日 月曜日 午後２時０分
