How to Use the Menu Functions
31
Audio Preference
• Auto
• MPEG
Selects the initial setting for audio tracks
[Auto]: Automatically selects the audio tracks if the programme has
more than two tracks. The priority is given in the following order -
Dolby Digital Plus, HE-AAC, Dolby Digital, MPEG.
[MPEG]: The priority is given to MPEG as long as the programme
contains MPEG audio.
•
Dolby Digital Plus and Dolby Digital are the method of coding digital
signals developed by Dolby Laboratories. Apart from stereo (2ch) audio,
these signals can be multi-channel audio.
•
HE-AAC is a perceptual coding method used to compress digital audio
for efficient storage and transmission.
•
MPEG is an audio compression method that compresses audio to the
smaller size without any considerable loss of audio quality.
•
Dolby Digital Plus and HE-AAC are the technologies for HD (High
definition) programmes.
•
Digital TV mode only
SPDIF Selection
• Auto
• PCM
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal
[Auto]: Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
[PCM]: Digital output signal is fixed to PCM.
•
For Digital TV mode, Video mode (p. 47) or Network video contents
(p. 58)
HDMI1 / 2 / 3 / 4 Input
• Digital
• Analogue
Selects to fit the input signal (p. 70)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
•
HDMI input mode only
Reset to Defaults
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
Timer
Item Adjustments / Configurations (alternatives)
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Sets the time until the TV automatically goes into Standby mode
Auto Standby
• Off
• 2 / 4 hours
Sets the time the TV automatically goes into Standby mode when no
operation is performed for the selected times
•
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
•
The notification message will appear 3 minutes before going into Standby mode.
