32
Various display methods
(cont.)
Multiple Source Multi Live Mode
Connect up to four computers to each of up to eight units, and display in each unit by the 4-screen multi style.
Click [ ] of the launcher.
The “Select Access Port” window appears.
2
Press the [INDEX] button on the remote control to turn the
display screen into a full screen display (the status when
no index window is displayed).
If you press the [INDEX] button once or twice when index windows are displayed on
the display screen, the screen will switch over to a full screen display.
1
Select the desired units, and click [OK].
Selected units are displayed in pink.
If click again, selected items are canceled.
If click [OK], the connection with the units is established.
5
Select the network number of the desired units from [Network].
Units powered on in the chosen network group are listed.
4
Click [ ] of [Access Device].
3
Check the status indication on the launcher to make sure that transmission is
possible (check that the green lamp is lit).
6
Click [ ] on the launcher.
The window shown to the right appears.
7
