11
Watching TV
1 Turn power on
(TV)
or
●
Mains power On / Off switch should be on.
(p. 8)
(Remote Control)
2 Select TV mode
3 Select a channel
up
down
or
●
To select two-digit channel position number, e.g. 39
Note
●
The TV will automatically go into Standby mode when
no operation is performed for 4 hours if [Auto Standby]
in the Timer Menu is set to [On].
●
The TV will automatically go into Standby mode when
no signal is received and no operation is performed for
10 minutes if [No signal Power off] in the Timer Menu is
set to [On].
Aspect
Change the aspect ratio (image size)
[16:9]: Directly displays the image at 16:9 without
distortion (anamorphic).
[14:9]: Displays the image at the standard 14:9 without
distortion.
[Just]: Displays a 4:3 image full-screen. Stretching is
only noticeable at the left and right edges.
[4:3]: Displays the image at the standard 4:3 without
distortion.
[Zoom]: Displays a 16:9 letterbox or 4:3 image without
distortion.
[4:3 Full]: Displays a 4:3 image enlarged horizontally to
fit the screen.
●
For HD (High definition) signals
[Sidecut Just]: Displays a 16:9 letterbox (anamorphic)
image full-screen. Stretching is only noticeable at the left
and right edges.
●
For HD (High definition) signals
[Sidecut Zoom]: Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
●
For HD (High definition) signals
Note
●
Aspect mode can be memorised separately for SD
(Standard definition) and HD (High definition) signals.
Information banner
Display Information banner
●
Also appears when changing a channel.
Example:
1
2
3
1
CH8
5.5MHz
PAL
16:9
TV
Input mode
Channel position
Channel number
Sound system
Colour system
Aspect ratio
1
, ,
II
,
Audio mode (p. 24)
2
Sound mute on
3
1 - 90
Off Timer remaining time
■ To hide
