4-40 Programmer’s Manual
Return Values
0
Successful.
703-793
A motion control error occurred. For errors
between 703-793. The operator corrects the
printer condition. Then the application must call
pclClearError to reset the Motion Control
subsystem. Refer to the MPCL
Packet
Reference Manual
for more information.
Other non-zero
An error occurred. Refer to the MPCL
Packet
Reference Manual
for more information.
Example
#include <stdio.h>
#include <stdlib.h>
#include "mmsultra.h"
void GetSupplyType(unsigned short *);
void GetStockLength(unsigned short *);
void GetStockWidth(unsigned short *);
unsigned short main(void)
{
unsigned short usStatus; // Printer completion status
unsigned short usStockWidth; // Stk. width in 1/100th inches
unsigned short usStockLength; // Stk. length in 1/100th inches
unsigned short usSupplyType; // Supply type, 0 - 2
unsigned short status = 0; // Print subsystem init. status
PRINTINIT rConfig; // Print subsystem data struct.
status = pc
lInit(NULL); // Start Print subsystem
if (status != 0)
{
printf("Init Failed\nError: %d", status);
exit(1);
}
pclPaperInfo(&usStockLength, &usStockWidth,
&usSupplyType);
/* GetSupplyType is a programmer-written function */
GetSupplyType(&usSupplyType);
