214
Changing Additional Settings
7
You can set the camera to turn off automatically if unused after a certain
length of time.
Set in [Auto Power Off] of the [R Set-up 3] menu. Select from [1min.]
(default setting), [3min.], [5min.], [10min.], [30min.], or [Off].
When using the AA battery holder D-BH109, select the type of the AA
batteries to use so the camera can determine the battery level correctly.
The default setting is [Auto-detect].
1
Select [AA Battery Type] in the [R Set-up 3] menu, and
press the four-way controller (5).
The [AA Battery Type] screen appears.
2
Use the four-way controller (23)
to select a battery type, and
press the 4 button.
When set to [Auto-detect], the camera will
automatically detect the type of batteries
being used.
Battery Settings
Minimizing Battery Consumption
• Perform any of the following operations to reactivate the camera from Auto
Power Off.
• Turn the camera off and on again.
• Press the shutter release button halfway.
• Press the 3 button or M button.
• Auto Power Off does not function in the following situations:
• when a slideshow is played back
• when the camera is connected to an AV device with a USB cable
• while transferring images via Eye-Fi card
Setting the Battery Type
AA Battery Type
Auto-detect
Lithium
Nickel-Metal Hydride
Alkaline
MENU
Exit
123
