52 Setting V-Chip (cont’d)
MPAA Rating Settings
You can block TV channel viewing according to the Motion
Picture of Association ratings. To do so, follow these steps.
1
Press SET-UP.
2
Press ▲ or ▼ to select V-CHIP SET UP.
Then, press ENTER.
3
Press the Number buttons to enter the 4-digit
access code. (The default code is 0000 if you have
not set up your own code yet or if the power has
failed.)
4
Press ▲ or ▼ to select MPAA RATING.
Then, press ENTER.
5
Press ▲ or ▼ to select the level at which you
want to block viewing.Then, press ENTER to
select BLOCK or VIEW.
When you Block a category, higher ratings turn to
BLOCK automatically. Lower ratings turn to VIEW.
When you set G to VIEW or BLOCK, all ratings turn
to VIEW or BLOCK automatically.
6
Press SET-UP to save your settings and remove
the menu.
MPAA Rating Explanations
•G - General Audience
• PG - Parental Guidance
suggested.
• PG-13 - Unsuitable for children
under 13
•R - Restricted; under 17
requires accompanying
parent or adult guardian
• NC-17 - No one under 17
admitted
•X - Mature audience only
•To disable all the MPAA
Ratings, set G to VIEW.
• The V-CHIP settings will be
retained after a power failure
(except the access code
reverts to 0000).
Helpful Hints
4-5
1,6
3
2,
DTV SET UP will show only in
DTV Mode.
