CD/VCD/MP3-CD
12
English
Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in
the memory in any order (except for MP-3 CD).
1. In stop mode, press PROGM to enter programme setting.
™ PROG will start flashing.
2. Press digits 0 - 9, +10 on the remote control or
∞ / §
to select the desired track.
3. Press PROGM to store the select track.
™ "PXX TXX" will show on the display screen and "PXX OK" on TV screen.
•
Repeat steps 1 to 3 to store other tracks.
4. Press 9 to end programme setting.
™ PROG will remain on the display.
•
Press
∞ or §
on the set (or on the remote control, press
¡ or ™
) in stop mode to review the
programme sequence.
5. Press 9 to play the programmed tracks.
•
If you press REPEAT during programme playback, the current track or all programmed tracks will be
played repeatedly.
™ REPEAT/REPEAT ALL and PROG will appear on the display.
6. Press 9 in stop mode to clear the programme.
™ "CLr PrOG " will be displayed.
™ PROG will disappear from the display.
Notes : - "P" represents PROGRAMME and "T" represents TRACK, "XX" is the current selected
Programme or Track number.
- The programming is automatically cleared as soon as the CD compartment is opened.
- The function of programme setting is disable in PLAY/PAUSE mode.
- Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before
storing tracks from such a VCD.
For MP3-CD only
1. In stop mode, press
PROGM
.
™ PROG will start flashing and "AXX" will be displayed.
™ On TV screen, "PXX AXX TXX?" and "PROGRAM" will be displayed.
2. Press and hold
∞ / §
to select the desired ALBUM and press
∞ / §
repeatedly (or digits 0 -
9, +10 on the remote control) to select the desired TRACK for programming.
3. Press
PROGM
to store the select track.
™ "PXX" will show on the display screen and "PXX OK" on TV screen.
™ PROG will remain on the display.
•
Repeat steps 1 to 3 to store other desired album and track.
•
Press
∞
or
§
in stop mode can review the programme sequence.
™ "PXX AXX TXXX" will show on TV screen.
•
Press
∞ / §
in stop mode to show the programme information.
™ The Album's number and Track's number will show on the display screen.
4. Press 2 to start programme playback. You can press
∞ / §
to select the programmed track to
play.
5. Press 9 once stop programme playback or twice to clear the programme.
PROGRAMMING TRACKS
AZ 5150 page 12
AZ5150/01 eng 02/20/02 16:53 Page 12
