English
25
•You can program up to 99 tracks to play in any desired
sequence.
•Tracks can be programmed more than once, but each time
counts as a track.(STEP)
•A program for playback can be made from both the disc in
the recorder and the disc in the player. A program for
recording can only be made from the disc in the player (CD
deck).
Programming for playback
1 Select Changer mode or DJ mode using the DJ MODE key.
➜ CHANGER or DJ MODE appears on the display.
2 Press CDR or CD to select the required deck.
➜ Selected key lights up.
3 Press PROG(ram) to enter Program mode.
➜ PROG flashes and PROGRAM appears on the display.
4 Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks (STEPS) are displayed.
5 Repeat step 3 to 4 for all tracks to be programmed.
6 Press STOP or PROG(ram) to end programming.
➜ PROG lights continuously.
7 Press PLAY/PAUSE 2; to start programmed play.
Programming for recording
1 Press RECORD TYPE to select the required recording mode
(see ‘Recording’).
2 Compile your programme as described in “programming for
playback”.
•Only tracks from the disc in the CD player can be stored.
3 Press RECORD to start recording.
Note:
- To review the program, press PROG(ram), followed by 5 or
6 with the CD player or CD recorder in stop mode.
- To add more tracks to the program, repeat steps 1 to 7.
- If you try to store more than 99 tracks, PROG FULL
appears on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
➜ PROG disappears from the display.
•The program is also cleared if you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROG(ram) to enter Program mode.
2 Use 5 or 6 to select the track from which to delete.
➜ The track number and program step will be shown on
the display.
3 Press DELETE/CANCEL to erase the track from the program.
➜ The remaining program steps and the remaining playing
time of the program will be displayed.
