11
Tip
In 12 hour format, [MONTH--DAY] is
displayed.
in 24 hour format, [DAY--MONTH] is
displayed.
Turn on
1
Press POWER.
The unit switches to the last selected »
source.
Switch to standby
1 Press POWER again to switch the unit to
standby mode.
The time and date (if set) appear on »
the display panel.
3 Connect the other end of the AC
adaptor to the wall outlet.
Set time and date
1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
[12 HR] begins to blink.»
2 Press / to select 12/24 hour format.
3 Press SET TIME/PROGWRFRQÀUP
The hour digits begin to blink.»
4 Press / to set the hour.
5 Press SET TIME/PROGWRFRQÀUP
The minute digits begin to blink.»
6 Repeat steps 4-5 to set the minute, year,
month, and day.
English
EN
