English
21
Clock/Timer
4 Press TUNING 4 ¢ (or 4 ¢ on
the remote control) to set the hours.
5 Press TIMER/SLEEP again.
➜ The clock digits for the minutes flash.
6 Press TUNING 4 ¢ (or 4 ¢ on
the remote control) to set the minutes.
7 Press TIMER/SLEEP to confirm the time.
➜ The timer is now set and activated.
Notes: .
– If CD source is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
– If iPod source is selected and no iPod player is
docked, TUNER will be selected automatically.
Activating and deactivating
TIMER
● In standby mode, press briefly TIMER/SLEEP
once.
➜ Display shows if activated, and disappears if
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of
time.
● During playback, press TIMER/
SLEEP on the remote control
once or more.
➜ Display shows and one
of the sleep time options in
sequence: 60, 45, 30,15, 00, 60... if you have
selected a time.
● To deactivate, during playback press TIMER/
SLEEP on the remote control once or more
until “ 00“
is shown, or press STANDBY ON
2on the system (or 2 on the remote control).
➜ disappears from the display.
Setting the clock
1 In standby mode, press and hold CLOCK/
DISPLAY on the remote control set for 2
seconds.
2 Press PROG to select 12-hour or 24-hour
display.
3 Press CLOCK/DISPLAY to confirm.
➜ The clock digits for the hours flash.
4 Press TUNING 4 ¢ (or 4 ¢ on
the remote control) to set the hours.
5 Press CLOCK/DISPLAY again.
➜ The clock digits for the minutes flash.
6 Press TUNING 4 ¢ (or 4 ¢ on
the remote control) to set the minutes.
7 Press CLOCK/DISPLAY to confirm the time.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, iPod FM or DAB is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
1 In standby mode, press and hold TIMER/
SLEEP about 2 seconds on the remote control.
2 Press SOURCE (or DISC/iPod/TUNER/
DAB on the remote control) to select sound
source.
3 Press TIMER/SLEEP to confirm your desired
mode.
➜ The clock digits for the hours flash.
DCB146_05_Eng 7/1/08, 12:0221
