60 Programmed Playback
You may determine the order in which Tracks will play.The order
that you set is called the Program.To set up programmed playback,
follow these steps.
● Before you begin, place the DVD/VCR in DVD mode.
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
1
While playback is stopped, press DVD, then press
MODE. The PROGRAM screen will appear.
4
2-3
1
2
Press the Number buttons to enter the number of
the first Track that you want to play.
● If you enter a wrong Track number, press CLEAR.The last
Track in the Program will be removed.
● Enter single-digit Tracks with a single Number button. For
example, for Track three, press the Number 3 button.
● For Tracks 10 and above, press the +10 button, then the
Number button for the first digit, then the Number but-
ton for the second digit. For example, to play Track 26,
press the +10 button, then press the Number 2 button,
then press the Number 6 button.
3
Repeat step 2 until you have entered all the Tracks
you wish to play in the Program. The total playing time
of the Program appears beside TIME at the top of the PRO-
GRAM screen.
4
Press PLAY B (o). The Tracks will play in the order in
which you programmed them.The Program will play once.
• You can not combine specific track
or random playback with pro-
grammed playback.
• You may play a Program repeatedly.
During programmed playback, press
REPEAT so REPEAT [TRACK] or
REPEAT [ALL] appears.The current
Track or the entire Program will play
repeatedly.
• To see which Tracks you stored in
the Program, press MODE during
playback.
• Track numbers that are not avail-
able on the Audio CD will be reject-
ed and erased. Enter a valid Track
number.
• Turning off the DVD/VCR or open-
ing the disc tray will erase the
Program.
Helpful Hints
