English
41
D Press S T to highlight one of the
following options.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Choose zero (0) for
average setting.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Choose zero (0) to
balance the contrast.
TINT
Increase the value to darken the picture
or vice versa. Choose zero (0) for
average setting.
COLOR
Increase the value to enhance the colour
in your picture or vice versa. Choose
zero (0) to balance the colour.
E Press W X to adjust the setting that best
suits your personal preference.
F Repeat steps D~E for adjusting other
color features.
G Press OK to con rm.
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
DVD Menu Options (continued)
Component
This setting allows you to toggle the
output of the video signal between RGB
(on scart) and Interlaced YPbPr.
A In ‘Video Setup Page’, press S T to
select { Component }, then press X.
{ Interlaced }
Select this for Interlaced YPbPr
connection.
{ RGB }
Select this for scart connection.
B Use S T to select a setting and press
OK to con rm.
Warning:
When the DVD player is set to
Interlaced YPbPr, some TV may not
properly synchronise with the
player on the SCART connector.
01-51_dvp5160_12_eng2.indd 4101-51_dvp5160_12_eng2.indd 41 2007-03-30 4:07:14 PM2007-03-30 4:07:14 PM
