Basic Connections
Option 2: Using Component Video
sockets (Y Pb Pr)
You can connect this unit to a TV
through the component video cables
which provides superior picture quality.
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required.
A Connect the component video cables
(red/blue/green - not supplied) from the
Y Pb Pr sockets on this unit to the
corresponding component video input
sockets (or labeled as Y Pb/Cb Pr/Cr or
YUV) on your TV.
B Connect the audio/video cable (red/white
- not supplied) from the VIDEO OUT
(CVBS) AUDIO OUT R/L sockets on
this unit to the audio input sockets (red/
white) on your TV. Leave the yellow
video cable disconnected.
C Proceed to ‘Getting Started - Setting up
Progressive Scan feature’ for detailed
progressive feature setup.
Audio
Video
Step 1: Connecting to
television
This connection enables you to view the
video playback from this unit.
You only need to choose one of the
options below to make the video
connection.
– For a standard TV, follow option 1.
– For a progressive scan TV, follow
option 2.
– For a HDMI TV, follow option 3.
Option 1: Using Composite Video
sockets (CVBS)
A Connect the audio/video cables (supplied)
from the VIDEO OUT (CVBS)
AUDIO OUT R/L sockets on this unit
to the scart convertor (supplied).
B Connect the scart convertor (supplied)
to the scart input socket on your TV.
Note:
When scart convertor is used, TV cannot
automatically detect the SCART signal.
Manual TV tuning to ‘SCART’ input is
required, see your TVs manual for more
information.
