11Installation
Source
This menu allows you to select the peripheral you connected to one of the
external inputs.
& Select Source with the cursor right.
é Press the cursor down to select one of the external inputs.
“ Press the cursor right to enter the list of types of peripherals attached to the
selected input.
‘ Select the peripheral device with the cursor up/down.
Once you have selected the source, e.g.VCR, this source will automatically be
selected when your remote control is in VCR mode, see p. 12, and you press
the w key on the remote control.
Decoder
If a decoder or a descrambler is connected, see p. 28, you can define one or
more programme numbers as decoder programme numbers.
& Select Decoder with the cursor right.
é Select Programme with the cursor down.
“ Select the programme number under which you have stored the programme
coming from your decoder.
‘ Select Status.
• Select the input used to connect your decoder:
None, EXT1, EXT2.
• Select
None if you do not want the selected programme number being
activated as a decoder programme number.
Source
EXT1
EXT2
EXT3
EXT4
EXT5
Front
Setup
1008.3 gb /69 08-07-2002 14:20 Pagina 11
