129
VQT2B30
*1 only
*2 only
If faulty management information is found, one of the following messages may appear. Be sure to follow
the messages. (Repairing may take time depending on the error.)
*1 only
*2 only
≥ The following message is displayed when abnormal management information is detected when the
scenes are displayed in thumbnail. To perform the repair, touch the scene with ° in the thumbnail,
and start the playback. Please be aware that if the repair fails, scenes with ° will be deleted.
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the data.
≥ When data recorded on another device is recovered, it may not be possible to play back the data on
this unit or the other device.
≥ If recovery fails, turn the power of the unit off and on again after waiting a while. If recovery fails
repeatedly, format a media on the unit. Please be aware that if a media is formatted, then all the data
recorded on the media will be erased.
≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.
About recovery
CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD)
CONTROL DATA ERROR DETECTED IN THE BUILT-IN MEMORY.
*1
CONTROL DATA ERROR HAS BEEN DETECTED. (HDD)
*2
THUMBNAIL DATA ERROR IS DETECTED.
SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLE
SCENES WILL BE DELETED.)
