English
31
Problem
Solution
Left and right sound outputs are
reversed.
The remote control does not function.
Wireless connection with the subwoofer
fails
The timer is not working
The Clock/Timer setting is erased
Unable to select Progressive Scan.
Some files on the USB device are not
displayed.
“DEVICE NOT SUPPORTED” scrolls on the
display.
✔ Check the speaker connections and location.
✔ Point the remote control at the remote control
sensor of the unit.
✔ Reduce the distance to the player.
✔ Remove any possible obstacles.
✔ Replace the batteries with a new ones.
✔ Check that the battery is loaded correctly.
✔ Ensure that the subwoofer is powered on.
✔ The distance between the main set and
subwoofer may exceed the maximum range of
wireless communication. Move the subwoofer
closer to the main set.
✔ Obstacles may exist between the main set and
subwoofer. Remove the obstacles.
✔ Strong interference may exist. Ensure there is no
strong interference that may impair the
communication between the main set and
subwoofer.
✔ If the problem remains, see “Installation - Step 1:
Connecting speakers - Connecting the wireless
subwoofer” for manual pairing.
✔ Set the clock correctly.
✔ Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔ Check that the output of the video signal is
switched to 'Pr/Cr Pb/Cb Y'.
✔ Check if the number of folders exceeds 99 or
the number of titles exceeds 999.
✔ Remove the USB mass storage device or select
another source.
Troubleshooting
pg019-pg031_MCD289-12-Eng-B 2008.1.24, 14:3731
