40 Audio Settings
1
While playback is stopped, press the SETUP button. The
setup screen will appear.
2
Press the Arrow op buttons to select Audio. Then, press
the OK button.
3
Press the Arrow op buttons to select an item: Digital Audio
Out, Dynamic Range, Downmix Mode or Down Sampling.
4
If you selected Dynamic Range, Downmix Mode, or Down
Sampling, press the OK button repeatedly to adjust the set-
ting of these items. When you are finished, go to step 6.
If you selected Digital Audio Out, press the OK button,
then go to step 5.
● Dynamic Range: Press the OK button repeatedly to turn Dynamic
Range On or Off. This compresses the range of sound volume by
suppressing loud sound and raising the volume of low sound.
However, Dolby Digital 5.1 Channel sound is compressed auto-
matically, even if “Dynamic Range” is “Off.”
● Downmix Mode: Press the OK button repeatedly to select Stereo
or Dolby Surround. Choose Dolby Surround if the DVD Changer
is connected to audio equipment that is Dolby Surround (Pro
Logic) compatible. Choose Stereo if the Changer is connected to
normal audio equipment.
● Down Sampling: Press the OK button repeatedly to select 48 kHz
or 96 kHz. Select 96 kHz if the Disc was recorded in PCM 96
kHz. Otherwise, select 48 kHz.
