1
1
Connect the supplied S-Video cable to the S-VIDEO OUT
jack of the DVD Player and to the TV’s S-VIDEO IN jack.
Or, use the CVBS VIDEO OUT jack or Component VIDEO OUT
jacks. Details are on pages 10 and 12. You only need one video con-
nection.
2
Connect the red and white cables of the supplied three-
prong audio/video cable to one set of the Left and Right
AUDIO OUT jacks on the DVD Player. Connect the other
end of the cables to the left/right AUDIO IN jacks on the
Stereo. Match the cable colors to the jack colors.
3
Connect the flat end of the DVD Player’s power cord (sup-
plied) to the MAINS (AC Power) jack on the back of the
DVD Player. Connect the power cords of the DVD Player,
TV, and Stereo to a power outlet.
Turn on the power of the TV and the Stereo. Press
STANDBY-ON on the front of the DVD Player to turn on
the DVD Player. The Standby light will disappear.
4
Set the TV to the correct Video In channel. Refer to your TV
manual. Or, change TV channels until the DVD logo is on the TV.
5
Set your Stereo to the correct Audio In channel or sound
source. Refer to the Stereo owner’s manual.
2
3
• Set the Analog output accord-
ingly. Details are on page 48.
Helpful Hint
