VCR Plus+
®
Timer Recording 43
A PlusCode
®
number is a number of up to eight digits, printed in most TV
guides next to the start time of a TV program.You can program a timer
recording quickly by entering the code for your program.
Before you begin, complete the VCR Plus+
®
channel setup. See page 27.
1
Press TIMER on the remote control.
2
Press CH+8 to select VCR Plus+ system, then press :.
3
Press the Number buttons to enter the PlusCode number
from your TV guide, then press OK. If you make a mistake,
press CLEAR to erase the PlusCode number, then enter it again.
Information about the timer will appear. If information is missing or
not available, you may be asked to enter more information. Follow
the instructions on the screen.You may be asked to enter a channel
number if you have not set up VCR Plus+ channels. See page 27.
4
If the timer recording information seems correct and com-
plete, press OK. Stored will appear at the bottom of the screen
briefly.The Timer menu will reappear.
5
Press TIMER to remove the menu.
6
Put a recordable DVD+RW or DVD+R in the Recorder.
Press STANDBY
yy
to turn off the Recorder at least five
minutes before the timer recording is set to begin. The
Recorder must be off in order for the timer recording to occur.
If you plan to play a DVD+R on another DVD Player, finalize the Disc.
See page 52.
To edit your recordings, see page 51. However, editing changes may not be
accessible when you play the Disc on other DVD Players.
