64 Night Mode, Remote Control Used
Remote Control Used
1
Press SYSTEM MENU. Press ; to select in the top left
corner of the menu bar at the top of the TV screen.
2
Press CH-9 repeatedly to select in the next menu, then
press :.
3
Remote control used will be highlighted. Press :.
4
Press CH+8 or CH-9 to select DVD Player or DVD
Recorder, then press OK. The factory setting is DVD Recorder. By
selecting DVD Recorder, you choose to operate the Recorder with its
supplied remote control (as shown at right and throughout this book).
If you have a Philips DVD Player and want to use its remote for the
Recorder, select DVD Player.You might not access all the Recorder’s
features unless you use the Recorder’s remote.
5
Press SYSTEM MENU to remove the menus.
Night Mode
Turn on Night Mode to improve the sound during low volume playback.
1
Press SYSTEM MENU. Press ; to select in the top left
corner of the menu bar at the top of the TV screen.
2
Press CH-9 repeatedly to select G, then press :.
3
Press CH-9 repeatedly to select Night mode, then press :.
4
Press CH+8 or CH-9 to select On or Off, then press OK.
5
Press SYSTEM MENU to remove the menus.
