A SERVICE OF

logo

Open as PDF
next previous
7EN
Important
Ifyoumadeamistake:
• Pressthedeviceselectionbuttontwiceto
exitsetup.TheredSetuplight
turnsoff.
•
Restartfromthebeginning.
• If the device does not respond at all or not to
all of the button commands or if you cannot
find the code for your brand, enter ‘9, 9, 9, 9’ in
step 3 and continue with step 4. The remote
control will now search its full database for a
code that works with your TV. Full database
search may take up to 15 minutes.
2.2.1 Settinguptheremotecontrolsfor
otherdevices(
DVDplayer/recorder,
DTV,Cable/Satellitebox,DVRand
VCR
)
1 Makesurethedeviceisturnedon,fully
operationalandabletorespondtoremote
controlcommands.E.g.insertadiscinthe
DVDplayer/recorderoravideocassettein
theVCR(
SRP2006WM only)
.
2 Thenfollowsteps2to6of‘
Settingupthe
universalremotecontrolstooperateyour
TV
’.Makesuretousethecorrectdevice
selectionbutton:
forSRP2003WM:
or .
forSRP2006WM:
, , , or .
2.2.2 Improvingbuttons
Whencorrectlysetup,theremotecontrol
shouldbeabletooperateallyourdevices.
However,whenusingtheremotecontrolforthe
firsttimeitmightoccurthatsomebuttonsdo
notyetfunctionasexpected.
Inthiscaseyoucanhavetheremotecontrol
searchforalternatives.
Note
Improvingbuttonsisnotpossiblewhenthe
codewasfoundduringfulldatabasesearch
(withcode‘9,9,9,9’).
Gettingstarted English
SRP2063WM_17__Manual 7 25-11-09 13:11