Selecting the recording speed (SP or LP)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press MENU on the remote control. The main menu will
appear.
c Select the line ’RECORD SPEED’ with rP = or
;P q and confirm with OK .
d Select the required recording speed with Q or P .
D’LP’: Long Play = half recording speed (double
recording time).
’SP’: Standard Play = normal recording speed.
e Confirm with OK .
f To end, press MENU .
DThe picture quality will be adversely affected when
recording at half recording speed (’LP’).
DFor playback, the correct recording speed will
automatically be selected.
Automatic recording from a satellite
receiver (SAT RECORDING)
You can only use this function, when you have a satellite
receiver which can control other equipment by a
’programming’ function.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press MENU on the remote control. The main menu
appears.
c Select the line ’SPECIAL SETTINGS’ with rP = or
;P q , and confirm with OK .
SPECIAL SETTINGS
OSD è ON p
CLOCK DISPLAY OFF
COUNTER T.LEFT
SAT RECORDING OFF
REPEAT PLAY OFF
DIRECT RECORD OFF
________________________________
EXITpMENU STOREpOK
d Select the line ’SAT RECORDING’ with rP = or
;P q .
e Select ’ON’ with Q or P .
DIf you want to switch off the function, select ’OFF’.
f Confirm with OK .
g To end, press MENU .
h Put a cassette in the machine.
i Use a scart cable to connect scart socket AV2 EXT2 on
the video recorder to the corresponding scart socket on
the satellite receiver.
j Programme the satellite receiver with the required
information (programme number of the TV channel, start
time, end time).
DThe information on how to programme your satellite
receiver can be found in the instruction manual of
your satellite receiver.
k Switch off the video recorder with STANDBY/ONm .
The video recorder is now ready to record. The beginning and
end of the recording is controlled via scart socket AV2 EXT2 .
DIf this function is switched on ’x’ will appear on the
video recorder display.
18
