A SERVICE OF

logo

5.2 Port Config
This section provides current ports status and detail setting of each port of GSW-2416SF. The screen in Figure 5-3
appears and Table 5-1 describes the port configuration object of switch.
Figure 5-3 GSW-2416SF Port Configuration Web Page screen
#Notice:
Due to VID value “0” is reserved for management purpose, the management linked port have to configured with PVID=0.
For example: The management PC connected to Port-24 of the switch via Ethernet. Port-24 has to be configured with
PVID=0, and the management has to be configured within the same domain as the switch.
EM-GSW2416SFv1 - 36 -