CID98LS_qwest Manual 11/8/00 8:17 AM Page 7
Message waiting indicator light continues to flash
when you know there are no new messages.
•
Unplug the AC adapter cord from the back of the Call Waiting ID unit.
Wait a few seconds and plug it back in.
Message waiting indicator light does not flash and
MESSAGE WAITING does not appear.
•
If you hear an interrupted dial tone on your phone signaling that you
have new messages but the red light does not flash on your Call Waiting
ID unit and the MESSAGE WAITING display does not appear, your Visual
Message Waiting Indication service may not be turned on. Call the
Qwest Services Center at 1-800-770-2513.
LINE ERROR message is displayed.
•
LINE ERROR appears on the display if the unit detects anything other
than valid Caller ID information during the silent period after the first
ring. If the telephone is answered between the first and second ring,
the Caller ID information may not be received properly.
•
LINE ERROR may indicate the presence of noise or static on your
telephone line. If this condition persists, call the Qwest Services Center
at 1-800-770-2513.
10 11
DESK STAND
A desk stand is provided with the CID98-LS to increase the angle in
which the unit sits. Attach the stand as shown below.
