User Guide 27
Q. What should I do when the safety alarm sounds?
The safety alarm will sound when the pilot switches to STANDBY as a safety
precaution.You MUST take the helm.
The safety alarm will sound when the pilot is in control of your boat, and:
• the S1000 loses contact with all of its connected controllers
or
• when the S1000 stops receiving valid GPS information.
General maintenance
Routine checks
The S1000 computer and S100 controller do NOT contain user-serviceable
parts. If you remove the main cover you will invalidate the warranty. It
should be serviced only by authorized Raymarine service technician.
As a result, user maintenance is limited to the following checks
• make sure all cable connectors are firmly attached and free of
corrosion
• examine for signs of wear or damage – replace any damaged
cables
• replace batteries when necessary
Cleaning the S1000 and S100
Take care when cleaning the display. Avoid wiping the display screen with a
dry cloth as this could scratch the screen coating. If necessary, only use a
mild detergent.
Never use chemical or abrasive materials to clean the computer or
controller. If it is dirty, wipe it with a clean, damp cloth.
81245_4.book Page 27 Monday, April 30, 2007 6:03 PM
