ANT.
ANT.
pages 3, 4, or 5.
Option A Hookup.
Use this hookup for a basic connection which
requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the CH 3 4 switch on the playback
VCR to either channel 3 or 4.
Tune the recording VCR to this channel to
receive the signal from the playback VCR.
3. Connect as shown.
4. Plug in power cords of VCRs and TV.
5.
Option B Hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation — use of TV•VCR button is not
required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided. A Y-adapter may be required to
hear sound from both channels if your other
VCR is stereo.
3. Plug in power cords of VCRs and TV.
4.
Select the LINE (audio/video) input on the
recording VCR to receive the signal from
the playback VCR.
Go to “Startup” section.
Go to “Startup” section.
B
A
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
