Troubleshooting
64
5
Multiple pages are fed
through the printer at
once.
Clean the friction pad if it is dirty.
See p.44 “Cleaning the Friction Pad”.
If the problem persists, set the paper the other way up, and then
print it.
Note
❒ This method cannot be used with the adhesive label paper.
Remove all paper from the tray and fan it gently to get air between
the sheets. After that, load it back into the tray.
The image is printed on the
reverse side of the paper.
Set the paper the other way up.
Paper misfeeds occur fre-
quently.
Check the paper size settings. The size set with the paper size dial
might be different from the actual paper size. Make the correct dial
setting.
See p.13 “Loading Paper”.
Use the recommended paper. Avoid using curled, folded, wrin-
kled, perforated or glossy paper.
See p.8 “Paper Recommendations”.
Clean the paper feed roller, friction pad and/or registration roller,
if they are dirty.
See p.44 “Cleaning the Friction Pad”, p.45 “Cleaning the Paper
Feed Roller”, or p.47 “Cleaning the Registration Roller”.
If the problem persists, set the paper the other way up, and then
print it.
Note
❒ This method cannot be used with the adhesive label paper.
Thin paper, if printed on both sides, may curl up at the corners and
get wrinkled and clogged. Select [Curl Prevention] [On] from the
[Maintenance] menu.
The control panel error
message stays on after re-
moving the misfed paper.
Open the front cover of the printer and then close it.
See p.69 “Removing Misfed Paper”.
Output are not delivered
to the selected tray you re-
quire.
Check the paper size settings. The size selected with the paper size
dial might be different from the actual paper size. Make the correct
dial setting.
See p.13 “Loading Paper in Tray 1 and the optional paper feed
unit”.
When using the Bypass Tray, set the paper size using the control
panel.
See p.19 “Loading Paper in the Bypass Tray”.
When you are using a Windows operating system, the printer driv-
er settings override those set using the control panel. Set the de-
sired output tray using the printer driver.
See the driver's online Help file.
Status Possible Causes, Descriptions, and Solutions
KirP4GB_Mainte-F6_FM_forPaper.book Page 64 Thursday, May 12, 2005 11:48 AM
